JBOD Data Recovery

RAID isn’t the only way to link multiple hard drives together. There are other ways to combine separate data storage devices into what seems to be a single volume. One of these ways is JBOD. The acronym JBOD stands for “just a bunch of disks”. On a basic level, JBOD is fundamentally very similar to RAID-0, in that neither offer any sort of data redundancy or fault tolerance. Because of this, some people in the computer science world consider RAID 0 to actually be a kind of JBOD, not a “true” RAID level. Like RAID 0, JBOD has a high risk of failure. If you’ve lost data from your JBOD setup, our JBOD data recovery experts can help.


How Does JBOD Work?

In a JBOD, the disks are not necessarily connected. Technically, connecting several external hard drives to your computer, each with its own drive letter in Windows, is enough to create a JBOD. In the literal sense, it is “just a bunch of disks”. But usually, when we talk about JBOD, we’re talking about multiple disks appearing as one unified storage volume. Instead of striping the disks, you span them together. When you span two hard drives together, you stitch the end of one volume right onto the beginning of the next. This appears to you and your operating system to be a single large volume with no gaps or seams. Like RAID 0, when one drive in a JBOD fails, the entire volume becomes inaccessible.

One key difference between a JBOD and RAID is that the disks in a JBOD can be of various sizes. If you try to make a RAID 0 with two 2-terabyte disks, one 3-terabyte disk, and one 4-terabyte disk, the controller will only use 2 terabytes from the third and fourth drives and ignore the rest of their storage capacity, giving you 8 terabytes of disk space. On the other hand, a JBOD will offer the full 11 terabytes. This is one of the points in JBOD’s favor and one reason why someone might want to use it over RAID 0. (It is our belief, though, that nobody should be using RAID 0 for any reason in this day and age.)

Other Ways to Use JBOD

A JBOD doesn’t necessarily have to be RAID 0’s spanned cousin. Some software RAID setups start out with a JBOD. The disks are spanned into a single volume, and then the software handles striping, parity, and other RAID features. A software RAID created using Windows Storage Spaces, for example, can be created using disks of any size and can provide striping, mirroring, and single or double parity on top of a JBOD made with a wide variety of data storage devices. If you’ve ever wanted to set up a RAID-5 array using two 16-gigabyte flash drives and a 32-gigabyte SD card, you probably could (although it probably wouldn’t be very useful).

How We Recover Data from a Failed JBOD

Just because a JBOD spans its data instead of striping it doesn’t make it any less failure-prone than RAID 0. JBOD and RAID 0 are both more than twice as likely to fail as a single hard drive, and that number only goes up as you add more drives. Not only can any drive fail, but the controller card or enclosure can fail as well. For this reason, data in a JBOD is especially vulnerable.

When we receive a JBOD data recovery case, our engineers create disk images of each drive that are as complete as possible, repairing any drives with require it. In most cases, even the failed hard drive(s) can be over 90% imaged after our engineers repair it. Just like in RAID cases, our technicians must use custom software to link the drives together. But a JBOD array isn’t quite as challenging for our engineers to put back together as a RAID array. Because JBODs are simpler by design, there are far fewer puzzle pieces that need to be put together.

Why Choose Gillware for JBOD File Recovery?

The data recovery experts at Gillware have tens of thousands of hours of experience. These hours of experience encompass thousands of RAID and JBOD data recovery cases. In our cleanroom lab in Madison, WI, we offer our engineers’ quality services at an affordable price.

At Gillware Data Recovery, we offer financially risk-free data recovery from crashed JBOD setups. We start with a free evaluation, and can even provide you a UPS label to cover the cost of inbound shipping. As part of our standard service, evaluation takes 1-2 business days on average. Expedited service is also available, and is still financially risk-free.

After evaluating your JBOD data recovery situation, we present you with a statement of work. This includes a firm price quote, probability of success, and how long we expect the recovery work to take. We only move forward with the recovery if you approve the quote. We don’t show you a bill until we’ve finished our work. If we’ve successfully recovered your data, we send it back to you on a new password-protected hard drive.