Keeping Data Recovery Possible With Fusion Drives

Updated: 4/4/2022

Apple introduced its Fusion Drive technology in 2012 to marry speedy solid state flash memory with traditional hard disk drives. The Fusion Drive is a proprietary system developed by Apple. It is available for the iMac and Mac Mini; however, modern Macbooks and Mac Pros exclusively use flash memory. Fusion Drives work entirely under-the-hood, and some users (and computer repair professionals) might not even know if the Mac they’re working on has a Fusion Drive.

This can have unexpected consequences when it comes to Fusion Drive data recovery. The SSD used in Fusion Drive setups is a small, tucked-away M.2 solid state drive that can easily go unnoticed by both the user of a disobedient Mac, and the computer repair technician who assesses the computer and decides its hard drive needs to go to a data recovery lab.

Due to the way Fusion Drives work, we need both the traditional hard drive and the solid state drive in order to recover the user’s data. Sometimes, we’ll receive the hard drive from a Mac that, unbeknownst to the client, belonged to a Fusion Drive setup. While we work on the drive, the user may have already replaced the old hard drive and started using their Mac again. This damages the data on the SSD and makes our job much, much more difficult—not to mention, it also makes our chances of successfully recovering our client’s data much lower.

What is a Fusion Drive?

You may be asking yourself: ‘what is a fusion drive?’. Fusion drives are simply Apple’s version of hybrid drive technology. Seagate and Samsung were responsible for releasing the first hybrid drives in 2007. Samsung released the Momentus PSD and Seagate released the SpinPoint MH80. Apple released the fusion drive for Mac in November of 2012.

Apple’s own answer to hybrid data storage isn’t quite the same as a hybrid drive, though. For starters, the Fusion Drive isn’t a single drive. Instead, it’s two separate drives: a speedy SSD, and a high-capacity hard disk drive in the usual location.

What’s Inside a Fusion Drive?

Of course, Apple is not the only vendor to marry solid state and spinning disk media. Many other hard disk drive manufacturers have worked to combine SSDs and HDDs. Seagate, for example, has its own line of hybrid hard drives. These hybrid hard drives have NAND flash memory chips connected to their control boards, which behave as a cache for frequently-used files.

In these hybrid drives, the flash memory doesn’t add any noticeable storage space to the drive—a hybrid drive with 250 gigabytes of space on its platters and 8 gigabytes of flash memory still only has 250 gigabytes of available storage space. But files the user uses often get transferred to the cache. When the user wants to pull these files up, the hybrid drive serves them from the speedy NAND chip instead of the comparatively-slow hard disk drive.

How Does Apple Fuses Drives?

Unlike other hybrid technologies, what makes the Fusion Drive special isn’t the hardware. Rather, it’s the software. The Mac’s operating system manages the two halves of the Fusion Drive to make them appear as a single logical volume. Unlike a 250 GB hybrid drive with an 8 GB NAND cache, which still only has 250 GB of storage space, a Fusion Drive with a 500 GB hard drive and a 128 GB SSD has 628 GB of storage space.

Not only that, but the software managing the Fusion Drive intelligently analyzes how the user makes use of their computer, and allocates the operating system, program files, and most frequently-used files to the SSD portion. It does all of this, while still presenting the dual-drive setup as a single logical volume. It’s a bit like a RAID-0 or JBOD, only with Apple’s proprietary “secret sauce” managing how two drives connect to each other.

The SSD on a 21.5" iMac's logic board
The SSD on a 21.5″ iMac’s logic board

Fusion Drive Data Recovery

Like with any RAID-0 or JBOD, then, when Fusion Drives come to Gillware for data recovery, we need both the HDD and SSD to get a complete picture of a client’s data. The SSD contains the entire O/S, along with frequently-used program files and user data. It also contains most, if not all, of the filesystem metadata.

This means that without the SSD, the hard drive on its own paints a very grim picture of our chances of successfully recovering a client’s data.
The problem here, unfortunately, is that a.) the Fusion Drive is all but invisible to the end user, and b.) Apple has been making its products very labor-intensive to tear down, making it hard to get at the logic board which contains the SSD. The SSD itself can be tricky to find as well.

And so sometimes, we here at Gillware end up getting a single hard drive from a client or a computer repair affiliate who, unbeknownst to them, belonged to an iMac or Mac Pro with a Fusion Drive setup. Due to the way Fusion Drives allocate their data to the SSD, our chances of finding our client’s critical data on the HDD alone are slim.

Challenges in Fusion Drive Data Recovery

It doesn’t take long for our logical hard drive failure recovery engineers to figure out if we’ve got the (least useful part) of a Fusion Drive setup on our hands. At this point, we contact the client, let them know that it looks like they had a Fusion Drive, and ask them to look for and send us the SSD.

Once we have both the SSD and HDD in our data recovery lab, our senior logical data recovery engineers can puzzle out how the two components fit together. This is a tough job, since Apple’s technique for combining the drives is wholly proprietary (and they’re not interested in sharing their secrets). But our engineers can usually glue the two drives together with a high degree of success.

But what can make Fusion Drive data recovery a sticky situation is if the end user has gone and put their Mac back to work after sending their original hard drive to us. Installing a new hard drive into a Mac with a Fusion Drive setup requires a complete reformat and O/S reinstall to the SSD, which can cause massive (and often irreparable) logical damage to the end user’s lost data.

How Can You Tell If Your Mac Has a Fusion Drive?

The Fusion Drive is a feature Mac customers must request when ordering their machine. Choosing a Fusion Drive over a single hard drive or single SSD is just like selecting whether you want 8 GB of RAM in your machine or 16 GB. The end user, then, should know whether their machine uses a single drive or a Fusion Drive.

But people don’t just buy their machines directly from the manufacturer! People buy their computers secondhand as well. In these cases, the end user might not know what’s going on under their Mac’s tiny hood.

Fusion Drive in the "About This Mac" dialog panel

You can check if your Mac has a Fusion Drive simply by checking how quickly it boots up. Macs with Fusion Drives tend to boot up in around 15 seconds.

In addition, if you have a Fusion Drive, System information will show two drives under the SATA interface instead of just one. Checking “About This Mac” and going to the “Storage” tab will also list the Mac as having a “Hard Drive + Flash Storage”.

When you need data recovered from a failed Mac that has a Fusion Drive setup, tearing down the machine to get at the sneakily-hidden SSD can be a pain—but it’s a necessary pain. If you have any suspicions that a failed Mac may have a Fusion Drive, make sure you give the machine a once-over to see if it has an SSD before sending it in to a data recovery lab.

This is assuming, of course, that you have an official Apple Fusion Drive. Since the magic is in the software, any Mac user can make their own hybrid, providing they have a machine that supports having a second drive added to it. The SSD half in a DIY Fusion Drive may be significantly easier to find and remove.

JB Larson
JB Larson

JB Larson is technologist passionate about researching data storage devices, educating clients about technology, and playing the piano when he's not working.

Articles: 72